As an Amazon Associate I earn from qualifying purchases.
volport - Note: 1. With this 3m stickies replacement parts, you can remount your phone socket wall mount and magnetic car mount for many times and do not worry waste money to buy another now one. 3. 2pcs extra metal plates: extras metal disc can be use inside of phone socket cap to work with magnetic car phone mount, take off the case when charging; 2.
How to use 3m vhb adhesive pad: 1. 2. Do not stick adhesive on rugged, it may not stick well, clean flat and hard surface will be better. All plates are made of metal, also can be pasted on cell phone or mobile phone case to works with magnetic car holder. Please stick metal plates outside of phone case if your phone needs wireless charging, not magnetic. Last but the most important point, texture silicone surface, please WAIT 24 HOURS after stuck. Peel off the yellow backing film, then wait 24 hourS to use after stuck, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base; 3.
Package included: volport 6pcs circle 3m vhb car mount sticky adhesive double side, if you have any problem when using, 2pcs 3m round metal plate disc; We provide 12-month warranty, do not hesitate to contact us, we will give you a satisfy solution. Peel off the red backing film, stick on the flat and clean surface you want, that's it. Tips for using 3m sticky adhesive: 1. If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again.
VIIMAKE - Correct the position of the base and paste Just press a few times and paste it on the dashboard, the bonding surface must be clean and dry. To achieve the bonding effect, which is easy to tear off and easy to peel off from the red VHB film. For most car dashboard mount base:size is: size: 1.
89" ×1. 1", the thickness is 005". High bonding adhesive:3m double-sided tape replaces screws and rivets, rivets, and can actually increase strength over time. Instructions for use: ①clean the area to be attached and keep it dry②when the tape is glued, the better the effect is after 24 hours of pasting, the longer the sticking time, please hold down for 10 to 30 seconds Step③After pasting, to maintain the stability of the later paste, apply the appropriate pressure evenly, it is recommended not to use immediately, the stronger the stickiness.33
3m vhb adhesive pad is one-time use item. Heat resistance&strong stickness:the double-side adhesive pad is a three layer material. These new mounting tapes adopt top 3m vhb super strong black gel, high temperature and low temperature resistance, no problem using in hot Summer when you driving car, stickiness is 40% stronger than original one, truck, vehicle, uber in florida etc. Moreover, bolts, fasteners and adhesives. It remains stable even on bumpy roads, without screws, welding, it is easy to peel without leaving any sticky residue.
Rhino Gadget - And the phone won't move or rattle even at high speed with the top down. Universal compatibility - can be used to all magnetic car phone mount and air vent mount designed to hold devices with the metal plate. The round corners of this thin metal plate are designed to protect your phone or hands from scratching.
It will not come off in hot or cold weather. The 3m adhesive is strong enough to hold the phone even with a case on it. Strong 3m adhesive - all 4 mounting plates have a 3m adhesive sticky back. Perfect design - these metal plates themselves are not magnetic, but they work well with magnetic car phone holder, air vent mount and navigation holder.
Safe and comfortable - no hassle phone mount plate. No harm to your device. With the extra universal mounting plate, GPS and tablet. They won't interfere with the motion sense, including your cellphone, you can use with multiple devices, internal battery and sensors of your device. Hold phone to the magnet mount without any slippage. 4 universal metal plates for up to 4 devices.
UGREEN - Dimension: rectangle - 1. 8" x 2. 6", htc u11, including ipad, oneplus, huawei mate 20/mate 10/p20/p10/p9, lg k10/v30/g6, you will have chance to apply the extant magnetic holder to more devices of various sizes, GPS, iPhone 11 Pro/XR/XSX/8/8 Plus/7/7 Plus/ 6/ 6S/5/SE, smasung s10+/s9/s9+/s8/s8+/s7/s7 edge/s6, Sony Xperia XA1/Z5, round one 's diameter - 1.
7 inch. Note: the metal plates are not magnets and are designed to attach to magnets. No worry of falling off. They allow you to reuse the discarded magnetic holders or share them with your family or friends. Strong self adheresive: all the metal plates have super sticky pads on their back, securing your devices tightly and firmly, even while driving on a bumpy road or severe brakes. Strong adhesive: applied with 3m adhesive sticker on the back, ugreen phone mount plate sticks on your phone back firmly and securely.
Metal plate replacement: the metal plates are perfect solution to the magnetic phone holders that are lack of metal discs. With different sizes, you could widely apply them to more phone and tablet mounts. Smooth surface with round edges protects your fingers or devices. From getting hurt. Universal compatibility: with 2 larger rectangle and 2 smaller circular mounting plates, cameras etc.
volport - Can be cut to fit phone socket car mount base as well. When your magnet dashboard car holder lost its viscosity, the width is 087", these backup mounting adhesives is a good way to re-stick dashboard car phone mount. 2. Make sure the desired surface is clean and dry, that means no wax, texture, dirt or porous surfaces.
Designed for dashboard magnetic mount base: volport rectangular 3m adhesive sticky fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. Size: the length is 1. 85", the thickness is 0047". Easy remove and reattach: these adhesive allow car mount stand on dashboard to be removed without leaving adhesive residue or damaging the surface. Wide use: can be use on flat hard surface such as home bathroom mirror, dash cam etc.
4. Please wait at least 24 hours ensure the sticker get the best stickiness before use. Volport products provide 12 month please contact us immediately if you have any problem. Can be uesed for christmas garland, jeep, christmas window stickers, truck, stable and secure even driving your uber, christmas wrapping paper, christmas decorations. Strong dashboard mount 3m vhb adhesion pads's stickiness is 40% stronger than original sticky glue, vehicle in bumpy roads.
MOFT - Connect your phone with your surroundings thanks to its double-sided magnet design, your phone can be stuck to any surface with the help of a magnetic sticky pad to free your hands in all possible ways. Intuitive use as an assistant in your gadget life, unfold it to a stand, it's easy to use - simply snap it on the back of your phone, and fold it back to a flat piece to carry it with you.
With the stand and magnetic property, it gives you a much smoother mobile experience without lifting a finger when it’s not necessary. Slim yet holds three cards at 5mm/02in thinness, it's slimmer than any other wallet but has the same capacity as most wallets to hold three cards for you to feel good while taking your cards without additional bulk.
Powerful functions packed in one slim design it's made for you to carry less. Your browsing experience don't have to be interrupted. Frim magnetic grip with a strong magnetic strength, the wallet can still be stuck to the back of the phone when the charging pad is between them for wireless charging.
volport - Can be a christmas gift or christmas decoration. Also for flexible mobile phone cases design. 3m sticky type adhesive on the back: the 3m adhesive is strong enough to stick the smartphone even with a case on it. For wireless charging: please place phone metal plate on the phone AWAY FROM wireless charging sensor.
Holds phone to the ultra heavy duty magnet mount without any slippage. And the phone won't move or rattle even at high speeds with the top down. It will not drop off in hot or cold weather. What's more, including your mobile phone, you can use these replacement parts as spares for other devices, smooth surface with no sharp edges would not damage your fingers and cell phone. Volport replaceable metal pad is not only compatible with VOLPORT magic cell phone holder, magnet mobile devices. The kit won't interfere with the motion sense, internal battery and sensors of your device.
Package include: 4 pack slim rectangular metal stickers for phone / GPS / GPS / tablet; 4 pack large round metal disks for phone / tablet +2 pack of extra small metal plates diameter 4.0 cm. Or place phone holder metal piece on phone case, please remove case when wireless charging. Universal compatibility note: this is metal plates sticker are not phone magnetic plate set, but also can be used to all magnetic car phone mount holder. 8 metal plate for up to 8 devices + 2 pack of extra small circular metal strips: with the extra universal replacable mounting plate, GPS and tablet.
volport - 2. Last but the most important rule, please don't stick adhesion on rugged, texture surface silicone phone case, wait 24 hours after stuck. Hard to peel off the red backing film, in this situation, it may not stick well. Designed for collapsible grip & car mount: volport new and big and security 3m adhesive replacement is designed to reuse expanding phone grips stand and dash magnet car holder assesorices; 6 pcs larger heat resistant round vhb dots replace glue of the bases of collapsible mount, custom racing, interior dash name recording, inside dash board notice, slot, 2 pcs smaller spare circles discs gel pads mounting tape, for the back of self magnetic car holder and glass, sun visor, rearview mirror cover.
Also be used for envelop, truck, stickiness is 40% stronger, high and low temperature resistance, auto windscreen, car windows, christmas gift, waterproof bass head.4. Vhb stickers for windshield banner, wireless charger mount, dash cam holder, plastic wall phone holder, cell phone holder, parking passes, 360 magnetic car mount, windshield wifi gps navigation mount, iphone car mount, wiper, collapsible phone grip car mount etc.
Adhesive protector can't stick well on phone case, we are here. Important note: here are some problem customer may encountered frequently. 2 pieces magnetic phone car holder adhesive pads: two small circle 3m double sided tape tiny foam adhesive disk work with the bottom of dashboard car mount. We adopt original black gel, no problem using for women in hot Summer when you driving your sporty car, jeep, sunshades, vehicle, uber etc. Volport product comes with 12-months warranty, boat.
MOSUO - Strong 3m adhesiveall 9 metal plates have a 3m adhesive sticky on the back. Firstly stick the clear protective film on the back of your phone or phone case, then stick the metal plate on it or put metal plate between device and its case. Smooth surface with round edges protects your fingers or devices from getting hurt.
Easy to use9 clear protective stickers are designed to prevent your phone getting scratched, 4 wipe pads are sent as GIFT to help clean the place. Note: tear off the blue protective film, your can see silver surface. Lighter and thinnerwith the thickness of 002", the slim and thin metal sheet can be easily attached to your devices. Dimension: round one 's diameter 1. 57 inch. The 3m adhesive is strong enough to hold the phone even with a case on it.
Wide compatibility the metal plates can be used to all magnetic car mounts for dashboard, air vent, cd slot or windows. Note: tear off the blue protective film, you will see the silver surface. 9 metal plates for up to 9 deviceswith 9 round mount plates, you can use with 9 devices, including your cellphone and tablet. You may share them with your family or friends to use. It will not come off, Keeps your device stable and secure while driving.
1. volport
Collapsible Grip & Stand, 3M Sticky Adhesive Replacement for Car Mount Compatible with Socket Base, VOLPORT 6 Pack Pops VHB Sticker Pads Double Sided Tape with Metal Plates for Magnetic Phone Holder
How to use 3m vhb adhesive pad: 1. 2. Do not stick adhesive on rugged, it may not stick well, clean flat and hard surface will be better. All plates are made of metal, also can be pasted on cell phone or mobile phone case to works with magnetic car holder. Please stick metal plates outside of phone case if your phone needs wireless charging, not magnetic. Last but the most important point, texture silicone surface, please WAIT 24 HOURS after stuck. Peel off the yellow backing film, then wait 24 hourS to use after stuck, stick adhesive to the back of mount and press firmly for 3 to 5 minutes for better connecting to the car mount base; 3.
Package included: volport 6pcs circle 3m vhb car mount sticky adhesive double side, if you have any problem when using, 2pcs 3m round metal plate disc; We provide 12-month warranty, do not hesitate to contact us, we will give you a satisfy solution. Peel off the red backing film, stick on the flat and clean surface you want, that's it. Tips for using 3m sticky adhesive: 1. If the red backing film hard to peel off and the black gel come up with, please repeat this act: peel-if come up-press red film back-peel again.
| Brand | volport |
| Manufacturer | VOLPORT |
| Height | 0.5 cm (0.2 Inches) |
| Length | 10 cm (3.94 Inches) |
| Width | 7 cm (2.76 Inches) |
2. VIIMAKE
6pcs Rectangle 3M Sticky Adhesive Replacement Kit, for Magnetic Car Dashboard Phone Mount Base Sticker Parts,VIIMAKE Double Side 3M VHB Tape Adhesive Pads Red
89" ×1. 1", the thickness is 005". High bonding adhesive:3m double-sided tape replaces screws and rivets, rivets, and can actually increase strength over time. Instructions for use: ①clean the area to be attached and keep it dry②when the tape is glued, the better the effect is after 24 hours of pasting, the longer the sticking time, please hold down for 10 to 30 seconds Step③After pasting, to maintain the stability of the later paste, apply the appropriate pressure evenly, it is recommended not to use immediately, the stronger the stickiness.33
3m vhb adhesive pad is one-time use item. Heat resistance&strong stickness:the double-side adhesive pad is a three layer material. These new mounting tapes adopt top 3m vhb super strong black gel, high temperature and low temperature resistance, no problem using in hot Summer when you driving car, stickiness is 40% stronger than original one, truck, vehicle, uber in florida etc. Moreover, bolts, fasteners and adhesives. It remains stable even on bumpy roads, without screws, welding, it is easy to peel without leaving any sticky residue.
| Brand | VIIMAKE |
| Manufacturer | VIIMAKE |
| Part Number | RE3M-6P |
3. Rhino Gadget
Universal Replacement Metal Plates 4 Pack with 3M Adhesive pads compatible with all Magnetic Car Mount Cradle Mobile Phone Holder Includes 2 x Large Rectangular Metal Plates 2 x Round Discs Black
It will not come off in hot or cold weather. The 3m adhesive is strong enough to hold the phone even with a case on it. Strong 3m adhesive - all 4 mounting plates have a 3m adhesive sticky back. Perfect design - these metal plates themselves are not magnetic, but they work well with magnetic car phone holder, air vent mount and navigation holder.
Safe and comfortable - no hassle phone mount plate. No harm to your device. With the extra universal mounting plate, GPS and tablet. They won't interfere with the motion sense, including your cellphone, you can use with multiple devices, internal battery and sensors of your device. Hold phone to the magnet mount without any slippage. 4 universal metal plates for up to 4 devices.
| Brand | Rhino Gadget |
| Manufacturer | Rhino Gadget |
| Height | 0.5 cm (0.2 Inches) |
| Length | 8 cm (3.15 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | Plates 4 Black |
| Model | PLATES-4-BLACK |
4. UGREEN
2 Round and 2 Rectangle Black, UGREEN Magnet Metal Plate Self Adhesive Magnetic Pads Replacement Metal Disc Plate with 3M Strong Adhesive for Universal Magnetic Phone Tablet holder Car Mount,4 Pack
7 inch. Note: the metal plates are not magnets and are designed to attach to magnets. No worry of falling off. They allow you to reuse the discarded magnetic holders or share them with your family or friends. Strong self adheresive: all the metal plates have super sticky pads on their back, securing your devices tightly and firmly, even while driving on a bumpy road or severe brakes. Strong adhesive: applied with 3m adhesive sticker on the back, ugreen phone mount plate sticks on your phone back firmly and securely.
Metal plate replacement: the metal plates are perfect solution to the magnetic phone holders that are lack of metal discs. With different sizes, you could widely apply them to more phone and tablet mounts. Smooth surface with round edges protects your fingers or devices. From getting hurt. Universal compatibility: with 2 larger rectangle and 2 smaller circular mounting plates, cameras etc.
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Weight | 0.02 kg (0.04 Pounds) |
| Part Number | 50416 |
| Model | 50416 |
5. volport
VOLPORT 5 Pieces Rectangle VHB Double Side Tape Sticky Mounting Pads for Magnetic Dashboard Cell Phone Holder, 3M Adhesive Sticker for Car Mount Base
Designed for dashboard magnetic mount base: volport rectangular 3m adhesive sticky fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. Size: the length is 1. 85", the thickness is 0047". Easy remove and reattach: these adhesive allow car mount stand on dashboard to be removed without leaving adhesive residue or damaging the surface. Wide use: can be use on flat hard surface such as home bathroom mirror, dash cam etc.
4. Please wait at least 24 hours ensure the sticker get the best stickiness before use. Volport products provide 12 month please contact us immediately if you have any problem. Can be uesed for christmas garland, jeep, christmas window stickers, truck, stable and secure even driving your uber, christmas wrapping paper, christmas decorations. Strong dashboard mount 3m vhb adhesion pads's stickiness is 40% stronger than original sticky glue, vehicle in bumpy roads.
| Brand | volport |
| Manufacturer | VOLPORT |
| Height | 1 cm (0.39 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 7 cm (2.76 Inches) |
6. MOFT
MOFT the First Snap-On Magnetic Stand & Wallet for iPhone 12 Sticky Pad*2
With the stand and magnetic property, it gives you a much smoother mobile experience without lifting a finger when it’s not necessary. Slim yet holds three cards at 5mm/02in thinness, it's slimmer than any other wallet but has the same capacity as most wallets to hold three cards for you to feel good while taking your cards without additional bulk.
Powerful functions packed in one slim design it's made for you to carry less. Your browsing experience don't have to be interrupted. Frim magnetic grip with a strong magnetic strength, the wallet can still be stuck to the back of the phone when the charging pad is between them for wireless charging.
| Brand | MOFT |
| Manufacturer | MOFT |
| Part Number | MOFT |
7. volport
Metal Stickers Discs with 3M Adhesive for Magnet Car Mount Cradle, VOLPORT 10 Pack Thin Replacement Metal Plate for Magnetic Phone Holder, Black, Universal, 4 Rectangular and 6 Round
Holds phone to the ultra heavy duty magnet mount without any slippage. And the phone won't move or rattle even at high speeds with the top down. It will not drop off in hot or cold weather. What's more, including your mobile phone, you can use these replacement parts as spares for other devices, smooth surface with no sharp edges would not damage your fingers and cell phone. Volport replaceable metal pad is not only compatible with VOLPORT magic cell phone holder, magnet mobile devices. The kit won't interfere with the motion sense, internal battery and sensors of your device.
Package include: 4 pack slim rectangular metal stickers for phone / GPS / GPS / tablet; 4 pack large round metal disks for phone / tablet +2 pack of extra small metal plates diameter 4.0 cm. Or place phone holder metal piece on phone case, please remove case when wireless charging. Universal compatibility note: this is metal plates sticker are not phone magnetic plate set, but also can be used to all magnetic car phone mount holder. 8 metal plate for up to 8 devices + 2 pack of extra small circular metal strips: with the extra universal replacable mounting plate, GPS and tablet.
| Brand | volport |
| Manufacturer | volport |
| Height | 0.3 cm (0.12 Inches) |
| Length | 10 cm (3.94 Inches) |
| Weight | 0.09 kg (0.19 Pounds) |
| Width | 6 cm (2.36 Inches) |
| Part Number | volport1205 |
| Model | VM0004US |
8. volport
Extra Super Strong VHB Circle Glue Tape for Mobile Car Holder, VOLPORT 6pcs Double Sided Sticker Pads for Swappable Phone Expanding Base, 3M Sticky Adhesive Pad Replacement for Collapsible Grip Stand
Also be used for envelop, truck, stickiness is 40% stronger, high and low temperature resistance, auto windscreen, car windows, christmas gift, waterproof bass head.4. Vhb stickers for windshield banner, wireless charger mount, dash cam holder, plastic wall phone holder, cell phone holder, parking passes, 360 magnetic car mount, windshield wifi gps navigation mount, iphone car mount, wiper, collapsible phone grip car mount etc.
Adhesive protector can't stick well on phone case, we are here. Important note: here are some problem customer may encountered frequently. 2 pieces magnetic phone car holder adhesive pads: two small circle 3m double sided tape tiny foam adhesive disk work with the bottom of dashboard car mount. We adopt original black gel, no problem using for women in hot Summer when you driving your sporty car, jeep, sunshades, vehicle, uber etc. Volport product comes with 12-months warranty, boat.
| Brand | volport |
| Manufacturer | volport |
| Height | 3.5 cm (1.38 Inches) |
| Length | 0 cm (0 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 3.5 cm (1.38 Inches) |
| Part Number | VOLPORT- VM0027US |
9. MOSUO
MOSUO 9 Pack Metal Plates, Replacement Mount Metal Plate Kits with 3M Adhesive on the back for All Magnetic Car Phone Holder Car Mount Cradle and other Magnetic Holder, 9 Round, Silver
Easy to use9 clear protective stickers are designed to prevent your phone getting scratched, 4 wipe pads are sent as GIFT to help clean the place. Note: tear off the blue protective film, your can see silver surface. Lighter and thinnerwith the thickness of 002", the slim and thin metal sheet can be easily attached to your devices. Dimension: round one 's diameter 1. 57 inch. The 3m adhesive is strong enough to hold the phone even with a case on it.
Wide compatibility the metal plates can be used to all magnetic car mounts for dashboard, air vent, cd slot or windows. Note: tear off the blue protective film, you will see the silver surface. 9 metal plates for up to 9 deviceswith 9 round mount plates, you can use with 9 devices, including your cellphone and tablet. You may share them with your family or friends to use. It will not come off, Keeps your device stable and secure while driving.
| Brand | MOSUO |
| Manufacturer | MOSUO |
| Part Number | MOS-METALL-02 |
