As an Amazon Associate I earn from qualifying purchases.1. PNGKNYOCN
4-pin Molex/IDE to 3 Pin CPU Fan Power Cable（2-Pack）, PNGKNYOCN 3-Pin Fan to 4-Pin Molex Pass-Through Power Adapter Cable
PNGKNYOCN - 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Connector 2: 2 x 3-pin Fan Internal Male. Connector 1: loop-through 4-pin Molex connector with male and female connections.
Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Solve the problem of insufficient 3Pin interface ports on the PC motherboard.
2. Airsun
3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable, 4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable
Airsun - Fans will be operated at the fixed molex voltage of 12V Only 2 pins in connector required. Power four 3 pin or 4 pin PWM connector PC case fans with a molex connector.
Cable length including connectors: 12"/30cm. Cable is compatible with standard 3 pin fans as sell. Quality high density black sleeving for all black appearance.
3. Maincore
MainCore 4 pin Molex Male to Female + 3 Pin Fan Connector Power Extension Cable Lead Adapter Joiner Coupler
Maincore - 4 pin molex male to female + 3 pin Fan Connector Extension Cable Lead Adapter Joiner Coupler. Power splitter molex male to Molex female and 3 Pin case fan. Molex extension with 3 pin fan power for adding fan power while keeping the 4 pin molex power connector. Adds a 3 pin case fan connection.
4. Xiatiaosann
4 Pin Molex Male to 4 x 3-Pin 4 -Pin PC Case Fan Sleeved Adapter Cable, Xiatiaosann 5 Pack 4-Pin Molex to PC Fan, PC Fan Splitter Braided Sleeve Power Supply Cable 30cm 12-inch
Xiatiaosann - Perfect cable length: the total length of the 4-pin Molex to PC fan connector is 30cm 12 inch, which is very suitable for fan placement. Note: this 4-pin molex is the actual 2-pin, and the pins are only 2 pins, but it can still work normally on your computer; the fan connector has no PWM speed control, and the PC fan can only rotate at a constant speed.
Stable fan operation: each fan connector has 12V, and the fan will run at a fixed Molex voltage of 12V.
Compatible with 3/4-pin fan: compatible with pc fans with 3 Pin/4 Pin interfaces, but the CPU cannot perform PWM speed control on the PC Fan. Durable: the black braided sleeve can protect the wires inside, making the wires not easy to break and wear; The heat shrink tube also makes the wires and connectors stronger.
5. DIFCUL
DIFCUL 4-Pin Molex to 4 x 3/4-Pin PC Case Fan Sleeved Adapter Cable, PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable
DIFCUL - Power four 3pin or 4pin pwm connector PC case fan with a 4pin molex connector, allows you more fan options. We are so confident in the quality of our products, we offer 100% satisfaction in our hassle-free Replacement Guarantee, so you can purchase our product without hesitation and worry.
High qualityhigh density black sleeving cable, 11. 8 inch length, cable is backwards compatible with standard 3-pin or 4-pin fans.
This sleeved adapter cable makes hiding the cables easy. Package include 1*4-pin molex to 4 x 3/4-pin pc case fan sleeved adapter cable. Product designfans will be operated at the fixed Molex voltage of 12V2-Pin but it still works fine on your computer, allowing adding as many fans to your PC.
Application4 pin molex to 4 x 3 pin / 4 pin 12v pc case fan splitter Y power adapter cable. Notethe output voltage is 12v, there is no speed measurement, pwm function 4p plastic shell, connect 2 wires, because the power is taken from the D port of the power supply, empty 2 positions without pins.
6. winwill
4Pcs USB to 4 Pin Molex Cooling Fan Connector Cable Adapter Cord for PC Quite Computer Case
winwill - Note：chassis fan must support low-voltage 5V to start，because USB voltage is 5V. Cable length: 30cm/11. 8inch. One end is 4 pin chassis fan headerit only need + - to power the fan, so other 2pin is empty, and another end is the computer USB port.
Function：the cable can convert usb 5v into 12V for computer PC fan use，You can use the USB port to power the chassis fan.
7. YieJoya
3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable, 4-Pin Molex to 5 x 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable
YieJoya - High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin or 4-pin fans. This sleeved adapter cable makes hiding the cables easy. No risk to buy: comes with 5 in 1 4 pin molex to 5 x 3 pin / 4 pin 12v pc case fan splitter, sufficient quantity can meet your daily life usage and replacement.
Power four 3pin or 4pin pwm connector PC case fan with a 4pin molex connector, allows you more fan options.
Fans will be operated at the fixed molex voltage of 12V2-Pin but it still works fine on your computer, allowing adding as many fans to your PC. 4-pin actural 2-pin molex to 5 x 3 pin / 4 pin pmw 12v pc case fan power adapter cable, 3-Pin or 4-Pin PWM Connector to Molex Computer Cooler Cooling Fan Splitter Y Power Cable.
30 days unconditional refund and exchange guarantee, if you have any issues, please feel free to email us and you are entitle to get a great customer service. 4 pin molex to 5 x 3 pin / 4 pin 12v pc case fan splitter y power adapter cable.
8. winwill
PC Chassis Fan Hub,10 Port 12V Molex to PWM Connector Fan Controller Adaptor with Adhesive Tape for Running Multiple Case Fans
winwill - Since the mainboard can only receive one rotation speed signal, but no speed signal. Easy to install - just plug the molex fan controller into the motherboard and connect to the PSU. Note:the speed of the fan connected to the red fan port on this board is controlled by the computer's operating system and NOT manually controlled; The other 9 black fan ports CAN NOT be adjusted in speed.
Note: 4pin fan speed can be adjusted by temperature control. Because one operating system can only control speed of one fan.
The red Port. 3pin fan can also be used, but as 3Pin has no PWM function, it is at fixed speed after inserting. In the hub interfaces, the remaining nine conventional fan interfaces have the PWM function, the RED CPU interface is the CPU fan dedicated interface with speed detection function.
Double-sided adhesive mounts the pc fan hub to any flat surface and the screw hole allows it to be fixed to the chassis. Manages multiple fans - expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12v 4-pin or 3-Pin fans, support simultaneous starting at most 10 channel fans.
9. Akasa
Akasa Multi-fan Adapter with Speed Reduction | 4 pin PSU Molex | Four 3-pin Fans Speed Reduction on 2 Fans | AK-CB001
Akasa - Designed & made by akasa - akasa is 100% dedicated to serving customers with excellent products. Speed reduction for two fans. Providing control over fan speed make high speed noisy fans significantly quieter.
Choice of 5v and 12V connectors. Connects four fans to the PSU. We never compromise on product quality.
| Brand | Akasa |
| Manufacturer | Akasa |
| Height | 1 cm (0.39 Inches) |
| Length | 15 cm (5.91 Inches) |
| Weight | 0 kg (0.01 Pounds) |
| Width | 3 cm (1.18 Inches) |
| Part Number | AK-CB001 |
| Model | AK-CB001 |
10. InLine
InLine® 3 Pin Molex Female to 6x 3 Pin Molex Male Fan Adapter Y-Cable
InLine - 3pin molex f to 6x 3pin Molex M. Fan adapter cable. Format Y-cable. Package weight: 002 kilograms.
| Brand | InLine |
| Manufacturer | INTOS ELECTRONIC AG |
| Height | 5 cm (1.97 Inches) |
| Length | 10.01 cm (3.94 Inches) |
| Weight | 0.02 kg (0.04 Pounds) |
| Width | 5 cm (1.97 Inches) |
| Part Number | 13230 |
| Model | 33436 |
PNGKNYOCN - 3 pin atx fan to 4 pin Molex connector cable fan power adapter. Connector 2: 2 x 3-pin Fan Internal Male. Connector 1: loop-through 4-pin Molex connector with male and female connections. Note: the 3-pin fan connector is only 2 pins/wire no tachometer pin/wire and the fan will run at maximum speed. Solve the problem of insufficient 3Pin interface ports on the PC motherboard.
Airsun - Fans will be operated at the fixed molex voltage of 12V Only 2 pins in connector required. Power four 3 pin or 4 pin PWM connector PC case fans with a molex connector. Cable length including connectors: 12"/30cm. Cable is compatible with standard 3 pin fans as sell. Quality high density black sleeving for all black appearance.
Maincore - 4 pin molex male to female + 3 pin Fan Connector Extension Cable Lead Adapter Joiner Coupler. Power splitter molex male to Molex female and 3 Pin case fan. Molex extension with 3 pin fan power for adding fan power while keeping the 4 pin molex power connector. Adds a 3 pin case fan connection.
Xiatiaosann - Perfect cable length: the total length of the 4-pin Molex to PC fan connector is 30cm 12 inch, which is very suitable for fan placement. Note: this 4-pin molex is the actual 2-pin, and the pins are only 2 pins, but it can still work normally on your computer; the fan connector has no PWM speed control, and the PC fan can only rotate at a constant speed.
DIFCUL - Power four 3pin or 4pin pwm connector PC case fan with a 4pin molex connector, allows you more fan options. We are so confident in the quality of our products, we offer 100% satisfaction in our hassle-free Replacement Guarantee, so you can purchase our product without hesitation and worry.
winwill - Note：chassis fan must support low-voltage 5V to start，because USB voltage is 5V. Cable length: 30cm/11. 8inch. One end is 4 pin chassis fan headerit only need + - to power the fan, so other 2pin is empty, and another end is the computer USB port. Function：the cable can convert usb 5v into 12V for computer PC fan use，You can use the USB port to power the chassis fan.
YieJoya - High density black sleeving cable, 10 inch length, cable is backwards compatible with standard 3-pin or 4-pin fans. This sleeved adapter cable makes hiding the cables easy. No risk to buy: comes with 5 in 1 4 pin molex to 5 x 3 pin / 4 pin 12v pc case fan splitter, sufficient quantity can meet your daily life usage and replacement.
winwill - Since the mainboard can only receive one rotation speed signal, but no speed signal. Easy to install - just plug the molex fan controller into the motherboard and connect to the PSU. Note:the speed of the fan connected to the red fan port on this board is controlled by the computer's operating system and NOT manually controlled; The other 9 black fan ports CAN NOT be adjusted in speed.
Akasa - Designed & made by akasa - akasa is 100% dedicated to serving customers with excellent products. Speed reduction for two fans. Providing control over fan speed make high speed noisy fans significantly quieter. Choice of 5v and 12V connectors. Connects four fans to the PSU. We never compromise on product quality.
InLine - 3pin molex f to 6x 3pin Molex M. Fan adapter cable. Format Y-cable. Package weight: 002 kilograms.
